cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
370
Views
0
Helpful
3
Replies

DMVPN Eigrp internal vs external routes

jfeo
Level 1
Level 1

I am working on a DMVPN with 10 spokes 2 of those spoke are redistributing eigrp. So my the internal dmvpn route is preferred.

Any suggestions!!!!!!!! without creating another eigrp

I changed the distance to 171 on eigrp one site it somehow worked

Known via "eigrp 5", distance 170, metric 1536256
  Tag 65527, type external
  Redistributing via eigrp 5
  Last update from 10.0.0.34 on GigabitEthernet0/0/3, 00:45:43 ago
  Routing Descriptor Blocks:
  * 10.0.0.200, from 10.0.0.34, 00:45:43 ago, via GigabitEthernet0/0/3

The other site it did not 

Known via "eigrp 5", distance 171, metric 284160, type internal
  Redistributing via eigrp 5
  Last update from 10.0.40.10 on Tunnel40, 00:46:37 ago
  Routing Descriptor Blocks:
  * 10.0.40.10, from 10.0.40.10, 00:46:37 ago, via Tunnel40
      Route metric is 284160, traffic share count is 1

3 Replies 3

jfeo
Level 1
Level 1

Has anybody come across this same issue

Hi,

I'm having trouble figuring out what your issue is? Are you two spokes redistributing statics/bgp/another eigrp process/ospf/ into your DMVPN eigrp process ( i.e. eigrp 5)?

 

You problem statement seems vague to me. 

steveahughes
Level 1
Level 1

I believe we need more detail.  Can you send the following? 

show ip route

show ip eigrp route

sh ip eigrp topology all-links

sh ip interface brief

sh run | sec router

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: