Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

DMVPN Eigrp internal vs external routes

I am working on a DMVPN with 10 spokes 2 of those spoke are redistributing eigrp. So my the internal dmvpn route is preferred.

Any suggestions!!!!!!!! without creating another eigrp

I changed the distance to 171 on eigrp one site it somehow worked

Known via "eigrp 5", distance 170, metric 1536256
  Tag 65527, type external
  Redistributing via eigrp 5
  Last update from 10.0.0.34 on GigabitEthernet0/0/3, 00:45:43 ago
  Routing Descriptor Blocks:
  * 10.0.0.200, from 10.0.0.34, 00:45:43 ago, via GigabitEthernet0/0/3

The other site it did not 

Known via "eigrp 5", distance 171, metric 284160, type internal
  Redistributing via eigrp 5
  Last update from 10.0.40.10 on Tunnel40, 00:46:37 ago
  Routing Descriptor Blocks:
  * 10.0.40.10, from 10.0.40.10, 00:46:37 ago, via Tunnel40
      Route metric is 284160, traffic share count is 1

3 REPLIES
New Member

Has anybody come across this

Has anybody come across this same issue

New Member

Hi,I'm having trouble

Hi,

I'm having trouble figuring out what your issue is? Are you two spokes redistributing statics/bgp/another eigrp process/ospf/ into your DMVPN eigrp process ( i.e. eigrp 5)?

 

You problem statement seems vague to me. 

New Member

I believe we need more detail

I believe we need more detail.  Can you send the following? 

show ip route

show ip eigrp route

sh ip eigrp topology all-links

sh ip interface brief

sh run | sec router

 

153
Views
0
Helpful
3
Replies