Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DMVPN with multi HUB

Dear all

I have seven hub with several routers at remotes.

now each router at remote has it hub router. but i to establish other tunnel to other hub but with priority issue for redundancy.

any document or sample?

regards to all

2 REPLIES
Hall of Fame Super Gold

Re: DMVPN with multi HUB

Yes, the examples are in the dmvpn design guide and white papers.

Note, you don't necessarily need to use another tunnel. With proper configuration you can use a single p-to-mp tunnel and multiple hubs within it.

hope this helps, please rate post if it does!

New Member

Re: DMVPN with multi HUB

Hi,

Take a look at http://www.cisco.com/en/US/tech/tk583/tk372/technologies_white_paper09186a008018983e.shtml at the "Dual Hub - Dual DMVPN Layout" section. That should get you going.

3620
Views
3
Helpful
2
Replies