Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Do I have to enable ssh/telnet on all devices on the network?

Is there a way to configure ssh/telnet on just one device and all devices will be configured? or do I have to configure them all.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Do I have to enable ssh/telnet on all devices on the network?

Chris,

You'll have to configure all of them. What you can do though is run your commands through notepad and then paste them into your devices. It'll make the configuration go much quicker.

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***
1 REPLY

Do I have to enable ssh/telnet on all devices on the network?

Chris,

You'll have to configure all of them. What you can do though is run your commands through notepad and then paste them into your devices. It'll make the configuration go much quicker.

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***
94
Views
0
Helpful
1
Replies
CreatePlease to create content