If you reconfigure the static routes so that they have an administrative distance that is greater than the AD of OSPF then you could let OSPF select the primary route as the wireless. But if OSPF is running over the serial links then I do not see what value there is in having floating static routes since OSPF would be aware of the primary path over the wireless and the backup path over the T1s. What function would the static routes have for this?
One aspect of this question does puzzle me. The static routes are for 192.168.1.0 and 192.168.2.0 and I see that there are network statements under OSPF for these networks. But they do not show up in the show ip interface brief output. Where are these networks?
Clearly in the current configuration the path chosen is via the static routes. The default administrative distance of static routes is much better than the administrative distance of OSPF and so static routes will be preferred to OSPF routes.
If OSPF will be running over both T1 links and over the wireless link and if OSPF is advertising the LAN (192.168.1.0 or 192.168.2.0) over these links then I see no reason to have static routes or floating static routes.
However based on the partial configs posted I believe that there are some issues that need to be resolved. On router A there is clearly a primary subnet (192.168.21.0/24 and a secondary subnet 192.168.1.0/24). There is an OSPF network statement for the secondary network but not for the primary network. This is generally a problem. I would suggest adding a network statement for the primary network under router OSPF. On router B the primary network and the secondary network appear to be the same 192.168.2.0/24. Is this correct? If so why is there a secondary configured?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.