We already have BGP implemented (ISP redundancy) at the main office building. It's got its ARIN approved ASN and a /24 prefix announced to the upstream ISPs.
My question is that if we were going to implement BGP at a branch office, do we need to apply a new AS number? Will it be a brand new setup or we can somehow use the same ASN? The branch office has its own /24 prefix and Internet connection. It talks to the main office through a L2L VPN tunnel.
If we can use the same ASN, what are the special configurations we need to be aware of? Thanks in advance.
Assuming iBGP peers need to be fully meshed and they need to be able to reach each other through either IGP or EGP network. We can implement Route-reflector or Confederation but how do we do that across public IP space WAN?
I have two routers running BGP on each side. I am sure we can do route-reflector or confederation to make iBGP working. However I am concerned about peering iBGP across multiple hops over the Internet. The hello packet is sent every 60 seconds by default. I just wanted to make sure this is the best practice and commonly deployed in the field.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.