Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Does 1841 support IPSec vpn ?

Hi,

I have 1841 router. show version details are:

Cisco IOS Software, 1841 Software (C1841-IPBASE-M), Version 12.3(11)T3, RELEASE SOFTWARE (fc4)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by Cisco Systems, Inc.

Compiled Tue 25-Jan-05 14:20 by pwade

ROM: System Bootstrap, Version 12.3(8r)T8, RELEASE SOFTWARE (fc1)

SCB-EURO uptime is 1 week, 5 days, 17 hours, 46 minutes

System returned to ROM by power-on

System restarted at 18:53:24 UTC Sun Aug 13 2006

System image file is "flash:c1841-ipbase-mz.123-11.T3.bin"

Cisco 1841 (revision 5.0) with 113664K/17408K bytes of memory.

Processor board ID FHK090910YH

2 FastEthernet interfaces

2 Serial(sync/async) interfaces

1 ISDN Basic Rate interface

DRAM configuration is 64 bits wide with parity disabled.

191K bytes of NVRAM.

31744K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

Does it support IPSec VPN?

If not what are the upgradations I have to do?

I know following options pleas correct me:

1 Installing VPN module in AIM slot and

2 Upgrading IOS to IPSec supported version.

Required your suggestions.

Regards

SKRAO

1 REPLY

Re: Does 1841 support IPSec vpn ?

Hi Siva,

The current IP base package that you have doesn't support IPSec.

You need to have a Advance security package for that.

Check out this link to understand the IOS packaging details and the feature set hierarchy

http://www.cisco.com/en/US/products/sw/iosswrel/ps5460/index.html

To understand more on IOS packaging, visit this QA section

http://www.cisco.com/en/US/products/sw/iosswrel/ps5460/products_qanda_item09186a00801af2c6.shtml

Use the feature navigator at the following URL, using which you can find out features supported based on platforms, the current ios image that you have etc.

A Very usefull tool, to understand what is currently supported with your devices/ios and how you can plan for upgradation.

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

AIM is optional. For additional throughput and other benefits your can opt for it.

-VJ

261
Views
0
Helpful
1
Replies
CreatePlease login to create content