Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

does 1841 support IPSec VPN

Hi,

I have 1841 with following show version information.

Cisco IOS Software, 1841 Software (C1841-IPBASE-M), Version 12.3(11)T3, RELEASE SOFTWARE (fc4)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by Cisco Systems, Inc.

Compiled Tue 25-Jan-05 14:20 by pwade

ROM: System Bootstrap, Version 12.3(8r)T8, RELEASE SOFTWARE (fc1)

SCB-EURO uptime is 1 week, 5 days, 17 hours, 46 minutes

System returned to ROM by power-on

System restarted at 18:53:24 UTC Sun Aug 13 2006

System image file is "flash:c1841-ipbase-mz.123-11.T3.bin"

Cisco 1841 (revision 5.0) with 113664K/17408K bytes of memory.

Processor board ID FHK090910YH

2 FastEthernet interfaces

2 Serial(sync/async) interfaces

1 ISDN Basic Rate interface

DRAM configuration is 64 bits wide with parity disabled.

191K bytes of NVRAM.

31744K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

To support IPSec VPN what needs to be upgraded?

Hardware as well as IOS or only IOS?

Required your suggestions......

Regards

SKRAO

1 REPLY

Re: does 1841 support IPSec VPN

Hi Siva

Currently your IOS code is of IP Base feature set for ipsec you need either advanced ip services or advanced security.

Advanced IP Services :

c1841-advipservicesk9-mz.12.3-11.T3.bin

Advanced Security :

c1841-advsecurityk9-mz.12.3-11.T3.bin

regds

273
Views
3
Helpful
1
Replies
CreatePlease to create content