Does a WAAS network module require WCCP to be configured?
When configuring an NME-WAE-522 as an Edge-WAE, since this is installed inside a 3845 router, do I need to configure WCCP on the 3845 and the NME? Or because the NME is physically inside the router is it considered 'inline'?
Web Cache Communications Protocol (WCCP) is a free software feature in Cisco IOS Software that runs on Cisco routers, including the Cisco 1800, 2600, 2800, 3600, 3700, 3800, and 7000 Series, and Cisco switches such as the Cisco CatalystÂ® 4500, 4900, and 6500 Series.
WCCP can provide fault-tolerance
A technology called Web Cache Communication Protocol Version 2 (WCCPv2) facilitates synchronization of Cisco IOS Software features and Cisco WAAS services. WCCP redirects traffic from the router to the WAAS module and back. If the WAAS module suffers an impairment, WCCP-a stateful protocol-bypasses the module and passes traffic directly to the WAN to preserve connectivity and user sessions.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...