Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Doubt about counters WAAS

Dear Mister

I have two WAEs , in both sites . We don't use a Central Manager for this .

The customer has a Local Application , in the port 5000 ( the same of the Yahoo-Messenger ) .

I remove this configuration , and create another por this application .

How can I see , by cli , how is functioning the optimization . What is the meaning of this :

show statistics tfo

Total number of optimized connections : 3752

No. of active connections : 97

No. of pending (to be accepted) connections : 0

No. of connections closed normally : 3042

No. of connections closed with error : 613

Total number of peers : 1

No. of entries into overload mode : 0

No. of connections reset due to -

Socket write failure : 59

Socket read failure : 0

Opt socket close while waiting to write : 0

Unopt socket close while waiting to write : 19

Opt socket error close while waiting to read : 291

Unopt socket error close while waiting to read : 1

DRE decode failure : 0

DRE encode failure : 0

Connection init failure : 0

Opt socket unexpected close while waiting to read : 0

Exceeded maximum number of supported connections : 0

Buffer allocation or manipulation failed : 0

Peer received reset from end host : 243

DRE connection state out of sync : 0

Memory allocation failed for buffer heads : 0

Unoptimized data received at optimized socket : 0

Best Regards

1 REPLY
Silver

Re: Doubt about counters WAAS

To display Traffic Flow Optimization (TFO) statistics for a WAE, use the show statistics tfo EXEC command.

show statistics tfo [application app-name | pass-through | peer | saving app-name]

Syntax Description

application (Optional) Displays statistics per application.

app-name Application name.

pass-through (Optional) Displays the pass-through statistics.

peer (Optional) Displays peer information.

saving (Optional) Displays savings for all applications.

100
Views
0
Helpful
1
Replies