Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DR & BDR communication

Dear all,

As DR & BDR listen on & All other routers listen on

If this is correct , That means DR send hellos on , and as BDR listen on ,then how BDR knows DR is Down when Dr goes down.

Thanks in Advance.


Re: DR & BDR communication

Hi suryakant ,

All OSPF routers continue to multicast HELLOS to, so they can keep track of their neighbors.

DROTHERs will send multicast updates to (DR/BDR listen). DR will flood multicast updates to DROthers on

Please note multicast hellos are always send to and all OSPF routers [DR/BDR/DRother] listen to this address for hellos. So since everybody's listening it is easy to detect failure of any router, including your question, failure of DR by BDR.



New Member

Re: DR & BDR communication

Hi Lejoe,

As any link on DROTHER goes down or comes up , DROTHER send multicast update to , so DR & BDR gets update.

but if any links on DR (or BDR) goes down or comes up , it will send multicast update to, but BDR (or DR )listen for multicast update on ,then how they get update

Thanks & Regards,


Hall of Fame Super Silver

Re: DR & BDR communication

Hello Suryakant,

if you do

sh ip interface type x/y on DR and BDR

at the line Multicast reserved groups joined: you will see, (and others)

DR and BDR can listen not only to

if you do it on a DRother you will see (and others) but not

these are multicast addresses so BDR can listen to DR update sent with destination

Hope to help


Re: DR & BDR communication

Hi suryakant,

As I pointed out previously every ospf router listens on, regardless of whether is DR/BDR/DRother. So when DR floods an update to, even the BDR listens to that one.



Re: DR & BDR communication


In OSPF, all routers when initially build the link states database they exchanged full routing updates and all routers have all information about OSPF topology based on the SPF tree algorithm.

Partial updates are sent when there is achange of the Network like a router failure,adding new router .. etc.

Full updates are also send every 30 minutes if no changes occured in the Network.



CreatePlease login to create content