Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DRAM fills up of C831 and C1700 routers

Please find below problem describtion of my customer:

We have about 30 Ciscon 800 -ja 1700 series routers in management

and in more than 10 routers have problem with filling up of memory.

Memory fills up and after that we are not able to connect to device.

It needs to be re-booted.

**************************************************************

Router:

Cisco IOS Software, C1700 Software (C1700-K9O3SY7-M), Version

12.3(7)XR3, RELEASE SOFTWARE (fc2) Synched to technology version

12.3(7.11)T1

49MB DRAM memory, 97% of which is in use

****************************************************************

Router:

Cisco IOS Software, C831 Software (C831-K9O3SY6-M), Version 12.3(7)XR3,

RELEASE SOFTWARE (fc2) Synched to technology version 12.3(7.11)T1

17MB DRAM memory, 98% of which is in use

*****************************************************************

Router:

Cisco IOS Software, C1700 Software (C1700-K9O3SY7-M), Version

12.3(7)XR3, RELEASE SOFTWARE (fc2) Synched to technology version

12.3(7.11)T1

48MB DRAM memory, 98% of which is in use

*****************************************************************

Sometimes it takes about one month to fill up the memory.

Usage of memory seems grow in steps.

Could this be IOS-version problem or configuration issue?

1 REPLY
Purple

Re: DRAM fills up of C831 and C1700 routers

Hi

It seems like a memory leak of some sort.

Would you be able to post the output of 'show memory allocating-process totals' - the output can be quite long, but the first 50 lines or so should be fine.

Paresh

113
Views
0
Helpful
1
Replies
CreatePlease login to create content