Please find below problem describtion of my customer:
We have about 30 Ciscon 800 -ja 1700 series routers in management
and in more than 10 routers have problem with filling up of memory.
Memory fills up and after that we are not able to connect to device.
It needs to be re-booted.
**************************************************************
Router:
Cisco IOS Software, C1700 Software (C1700-K9O3SY7-M), Version
12.3(7)XR3, RELEASE SOFTWARE (fc2) Synched to technology version
12.3(7.11)T1
49MB DRAM memory, 97% of which is in use
****************************************************************
Router:
Cisco IOS Software, C831 Software (C831-K9O3SY6-M), Version 12.3(7)XR3,
RELEASE SOFTWARE (fc2) Synched to technology version 12.3(7.11)T1
17MB DRAM memory, 98% of which is in use
*****************************************************************
Router:
Cisco IOS Software, C1700 Software (C1700-K9O3SY7-M), Version
12.3(7)XR3, RELEASE SOFTWARE (fc2) Synched to technology version
12.3(7.11)T1
48MB DRAM memory, 98% of which is in use
*****************************************************************
Sometimes it takes about one month to fill up the memory.
Usage of memory seems grow in steps.
Could this be IOS-version problem or configuration issue?