Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DRAM memory upgrade for VIP2-10, VIP2-15, CX-FEIP2-2TX, and CX-FEIP2-2FX

I would like to know if is it possible upgrade memory in a CX-FEIP2. I think my Processor is using one of these part numbers: V2-10/15/FE2-UPG= or

VIP2-10/15/FE2-UPG.

Slot 5:

Physical slot 5, ~physical slot 0xA, logical slot 5, CBus 1

Microcode Status 0x4

Master Enable, LED, WCS Loaded

Board is analyzed

Pending I/O Status: None

EEPROM format version 1

FEIP2 controller, FRU: CX-FEIP2-(2TX/2FX)=, HW rev 2.14, board revision C0

Serial number: 27702267 Part number: 73-1684-05

Test history: 0x00 RMA number: 00-00-00

Flags: cisco 7000 board; 7500 compatible

EEPROM contents (hex):

0x20: 01 20 02 0E 01 A6 B3 FB 49 06 94 05 00 00 00 00

0x30: 60 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00

Slot database information:

Flags: 0x4 Insertion time: 0x2A1C (35w5d ago)

Controller Memory Size: 32 MBytes DRAM, 2048 KBytes SRAM <<<<<<<<<<-----------------------

Startup time: 2836 msec

PA Bay 0 Information:

Fast-Ethernet PA, 1 ports, 100BaseTX-ISL, FRU: PA-FE-TX-ISL=

EEPROM format version 1

HW rev 1.04, Board revision B0

Serial number: 27739883 Part number: 73-2570-02

PA Bay 1 Information:

Fast-Ethernet PA, 1 ports, 100BaseTX-ISL, FRU: PA-FE-TX-ISL=

EEPROM format version 1

HW rev 1.04, Board revision B0

Serial number: 27739635 Part number: 73-2570-02

I found the possible successor can be as follow:

VIP2-40 with MEM-VIP240-64MB-D or MEM-VIP240-128MB-D

VIP2-50 with MEM-VIP250-64M-D or MEM-VIP250-128M-D

Can these memories using in VIP modules be used in FEIP modules?

I will appreciate a lot if someone could send me an answer about this information.

1 REPLY
New Member

Re: DRAM memory upgrade for VIP2-10, VIP2-15, CX-FEIP2-2TX, and

I found the links below but it is not aswered my question:

http://www.cisco.com/en/US/products/hw/routers/ps359/products_documentation_roadmap09186a00801c0fcc.html

http://www.cisco.com/en/US/docs/routers/7500/vip2/installation/guide/2658vip2.html#wp21605 http://www.cisco.com/en/US/docs/routers/7500/vip2/installation/guide/2658vip2.html%23wp21605>

http://www.cisco.com/en/US/products/hw/routers/ps359/prod_installation_guide09186a00800f251e.html#wp3560 http://www.cisco.com/en/US/products/hw/routers/ps359/prod_installation_guide09186a00800f251e.html%23wp3560>

I will appreciate a lot if someone could send me an answer about this information.

152
Views
0
Helpful
1
Replies
CreatePlease to create content