Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Drop rate giving value, but no exceed packets

G'day all,

I took this output after clearing interface counters.

Strangely drop rate is 4000 bps but no exceeded or violated packets.

Could somebody help me to interpret this command output?

rt02#sh policy-map interface ser 3/2:0

Serial3/2:0

  Service-policy input: abcd

    Class-map: class-default (match-any)

      2434 packets, 396940 bytes

      30 second offered rate 257000 bps, drop rate 9000 bps

      Match: any

        2434 packets, 396940 bytes

        30 second rate 257000 bps

      police:

          cir 512000 bps, bc 64000 bytes, be 128000 bytes

        conformed 2420 packets, 367186 bytes; actions:

          transmit

        exceeded 21 packets, 30142 bytes; actions:

          drop

        violated 0 packets, 0 bytes; actions:

          drop

        conformed 0 bps, exceed 0 bps, violate 0 bps

  Service-policy output: abce

    Class-map: class-default (match-any)

      2412 packets, 234561 bytes

      30 second offered rate 286000 bps, drop rate 4000 bps

      Match: any

        2412 packets, 234561 bytes

        30 second rate 286000 bps

      police:

          cir 512000 bps, bc 64000 bytes, be 128000 bytes

        conformed 2412 packets, 234589 bytes; actions:

          transmit

        exceeded 0 packets, 0 bytes; actions:

          drop

        violated 0 packets, 0 bytes; actions:

          drop

        conformed 0 bps, exceed 0 bps, violate 0 bps

rt02#

266
Views
0
Helpful
0
Replies
CreatePlease to create content