We're looking at the 1921 as a possible replacement for the 1841. From what I can see, the WIC-1DSU-56K4 is not supported in the 1900/2900/3900 routers, and I can't seem to find any information about a replacement.
Does anyone know if there will be some sort of DS0 interface for the ISR G2 series at some point, or has Cisco simply done away with all support for 56k circuits moving forward.
Not a major issue at this point, since we can still get 1841s, but at some point the 1800s are going to end up discontinued, and we're wondering what the migration path would be.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...