DS3 Config with NM-1A-T3

[ibrand]

Does anyone have a configuration example for setting up a DS3 with an NM-1A-T3 interface? I can't seem to get the interface to come up. The only thing I have from the ISP is:

framing cbit

line code B3zs

Bandwidth 20100

encap ppp

Any help would be appreciated.

[wochanda]

I hate to be the bearer of bad news, but NM-1A-T3 doesn't support PPP. It is ATM only.

If you want to do HDLC/PPP/Frame on your platform, you probably want to look at NM-1T3/E3

http://www.cisco.com/en/US/products/hw/modules/ps2797/products_data_sheet09186a008010fba2.html