I'm trying to convert our existing QoS template that we use on our 3750/3560 to work on our new Nexus 5000 switches.
The ACLs and class-maps are ok, but it seems I can't do a "set dscp xx" within the policy-map on the Nexus 5000, like I was able to using the 3750/3560.
This is what I normally configure on a 3560/3750 :
set dscp ef
set dscp af31
set dscp default
The "set dscp xyz" command isn't available on my Nexus 5000s. I'm running NX-OS version 4.1(3)N1(1)... I'm currently unable to download version N2 from Cisco (some cryptic error about mismatched data), so I can't verify whether "set dscp" is available there in the newer version.
Have I misunderstood something about the QoS on Nexus 5000s ?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...