12-19-2011 05:27 AM - edited 03-04-2019 02:41 PM
Hi,
I configured a 1841 router that connects to a DSL modem. This DSL connection is our Internet connection for vendor and IT testing.
I have connectivity to the Internet using nat and have configured the router to act as a DHCP server. It seems to be working fine. I just want to configure some best practices for securing the device from the outside access. Is there some standard best practices I should be configuring?
Thank you.
Solved! Go to Solution.
12-19-2011 09:12 AM
Pat,
Have a look at this doc for best practice.
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080120f48.shtml
HTH
12-19-2011 09:12 AM
Pat,
Have a look at this doc for best practice.
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080120f48.shtml
HTH
12-19-2011 09:19 AM
Thanks Reza.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide