Symptoms: The following traceback may appear during a fax call:
%HPI-3-FAILED_START: channel:1:15:25 DSP ID:0x1, failed mode 0 for service 26 -Traceback= 147434C 1483864 1580C40 160043C 1600E58 154B758 154C79C 14F2D34442E48 446F28
Conditions: This symptom is observed on a Cisco 3810 after an upgrade from Cisco IOS Release 12.2(13) to Release 12.3(1).
Workaround: There is no workaround.
1. %HPI-3-FAILED_START: channel:[chars] DSP ID:[hex], failed mode [dec] for service [dec]
DSP services could not be started.
Recommended Action: Copy the error message exactly as it appears on the console or in the system log, contact your Cisco technical support representative, and provide the representative with the gathered information.
So i would suggest open TAC case for resolving your issue.
We are pleased to announce availability of Beta software for 16.6.3. 16.6.3 will be the second rebuild on the 16.6 release train targeted towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are looking for early feedback from custome...