router(config-controller)#ds0-group 1 timeslots 1-24 type e&m-wink-start
% Not enough DSP resources available to configure ds0-group 1 on controller T1 0
/0/0
% The remaining dsp resources are enough for 14 time slots.
% For current codec complexity, 2 extra 16 channel dsp(s) are required to create
this voice port.
does that mean I've to buy 2 extra 16 channel dsp(s)to create 24 channels?
even though I bought following modules:
| 32-channel high-density voice and video DSP module |
| 1-Port 2nd Gen Multiflex Trunk Voice/WAN Int. Card - T1/E1 |
