05-08-2006 01:08 PM - edited 03-03-2019 12:37 PM
Hi ,
Could any please explain these counters.
MyNode.1.10.VISM8.a > dspsarcnt 131
SarShelfNum: 1
SarSlotNum: 10
SarChanNum: 131
Tx Rx
--------------- ---------------
Total Cells: 60724167 37944533
Total CellsCLP: 0 0
Total CellsAIS: 0 0
Total CellsFERF: 0 1
Total CellsEnd2EndLpBk: 2517672 2517264
Total CellsSegmentLpBk: 0 0
RcvCellsDiscOAM: 0
regards
Neo
05-08-2006 02:34 PM
Neo,
These are stats for the SAR (Segmentation & Reassembly) function for the VISM module. The first counter is the number of cells transmitted and the second is the number received
Total Cells: total number of cells transmitted and received
Total CellsCLP: total number of cells with the CLP bit set
Total CellsAIS: total number of AIS (Alarm Indication Signal) cells
Total CellsFERF: Total number of Far End Receive Failures
Total CellsEnd2EndLpBk: total number of OAM end-to-end loopback cells
Total CellsSegmentLpBk: total number of OAM segment loopback cells
RcvCellsDiscOAM: number of OAM cells discarded
I would appreciate you rating the post if it helps.
Paresh
05-09-2006 02:21 AM
Hi ,
thnkas for your reply.which counters should be an area of concern for me ?
regards
Neo
05-09-2006 03:46 AM
Hi Neo,
The ones that could indicate potential problems are:
Total CellsCLP: this may or may not be a concern depending on how your services are configured but a large proportion of cells with CLP set should be investigated.
Total CellsAIS: these indicate PVC failures
Total CellsFERF: these indicate PVC failures
Paresh
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: