DUAL ADSL Line one 2811

[prajothpj]

Hi,

can you please help me to configure dual ADSL line on cisco 2811 router to do WAN load balencing.

here i dont have any Static IP form both ISP ,ADSL over PPOA (dynamic)

Thanks & regards

Praju

[thiru.vel10]

HI

check this link for PPPoA configuration with out static IP. once ADSL link came up, use the static route for load balance

http://www.cisco.com/en/US/docs/routers/access/1800/1801/software/configuration/guide/pppoanat.html#wp1160840

[apach]

You need:

IOS NAT Load-Balancing for Two ISP Connections

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a0080950834.shtml