08-13-2013 03:07 AM - edited 03-04-2019 08:44 PM
Hello All,
I've been looking for a way to create a point-to-multipoint Tunnels between Hub and Spoke routers until I found assistance here (Configuring Point-to-Multipoint IPSec Tunnels).
After some testing, I realized that the DMVPN won't be sufficient since I will require a backup Hub router. So after searching, I found that this can be done using DUAL DMVPN, but unfortunately, I couldn't find any config guide for that.
I would appreciate someone to provide me with a guide for the DUAL DMVPN.
Solved! Go to Solution.
08-13-2013 04:25 AM
Hi Islam,
Check this
http://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/VPNLoad/ch8_Dual.pdf
HTH,
Lei Tian
Sent from Cisco Technical Support iPhone App
08-13-2013 04:25 AM
Hi Islam,
Check this
http://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/VPNLoad/ch8_Dual.pdf
HTH,
Lei Tian
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide