Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Dual DMVPN

Hello All,

I've been looking for a way to create a point-to-multipoint Tunnels between Hub and Spoke routers until I found assistance here (Configuring Point-to-Multipoint IPSec Tunnels).

After some testing, I realized that the DMVPN won't be sufficient since I will require a backup Hub router. So after searching, I found that this can be done using DUAL DMVPN, but unfortunately, I couldn't find any config guide for that.

I would appreciate someone to provide me with a guide for the DUAL DMVPN.

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Dual DMVPN

Hi Islam,

Check this
http://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/VPNLoad/ch8_Dual.pdf
HTH,
Lei Tian

Sent from Cisco Technical Support iPhone App

1 REPLY
Cisco Employee

Re: Dual DMVPN

Hi Islam,

Check this
http://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/VPNLoad/ch8_Dual.pdf
HTH,
Lei Tian

Sent from Cisco Technical Support iPhone App

179
Views
0
Helpful
1
Replies
CreatePlease to create content