cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2090
Views
0
Helpful
1
Replies

Dual ISP Failover Configuration Cisco 891W

rickincanada
Level 1
Level 1

Hello - let me begin this post by introducing myself as someone fairly new to the advanced world of networking. 

What I currently have is a Cisco 891W Router as well as two ISP's (both with dynamic IP's) in.  I'm currently just running one of my modems into the 891 through the FE8 port and then if for some reason I have an internet failure switching the ISP modems.  What I'm wondering is if there is a fairly simple way to configure (and attach) both modems to this router and then set it up to handle this failover automatically?

Any help you can provide would be greatly appreciated!

Thanks,

Rick

1 Reply 1

paolo bevilacqua
Hall of Fame
Hall of Fame

It is not simple especially if you don;t have experience ond good understading of IOS.

For this reasons the best would be that you engage a reputabe professional or certified Cisco partner for the job.

Alternatively, you can refererence to this document:

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a00808d2b72.shtml

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: