07-25-2008 10:02 AM - edited 03-03-2019 10:54 PM
I have a bit of a challenge. I have installed a point-to-point microwave link and assigned it ip of 172.24.0.x/29 on each node. At the PE (router) i configure to subinterfaces one for Vlan22(internet) and a second for vlan 33 (Management). Vlan 33 covers the 172.24.0.x/29 subnet while vlan 22 covers the 6x.17x.x.x/29 subnet for the client. The issue is I configure a trunk on the switch port to allow vlan 22, 33. however assigning a host the 6x.17x.x.x ip i cant ping my gate way on the same subnet in vlan 22.
Please help
07-25-2008 10:17 AM
Hi,
what I understand about your setup is
SW1 and SW2 both has VLAN's 33 and 22 configured
Now, if this is the case did you configure your router's in bridge mode?
07-25-2008 10:24 AM
ok here is the setup
the issues are
1. i configure a trunk to pass vlan 22,33 no problems if
2. however connecting a host at
07-25-2008 10:58 AM
Hi,
please share the config on R1.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide