Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

E1 PRI configuration Help

Hello,

Can you please send me a configuration for an E1 PRI , i will use this access for data transfer.

thanks

5 REPLIES
New Member

Re: E1 PRI configuration Help

can I use this configuration ?

!

controller E1 1/0

framing NO-CRC4

pri-group timeslots 1-31

!

!

interface Serial1/0:15

ip address 192.168.150.34 255.255.255.224

no cdp enable

encapsulation ppp

dialer idle-timeout 119

dialer string xxxxxx

dialer-group 1

isdn switch-type primary-net5

isdn point-to-point-setup

ppp authentication chap pap callin

ppp chap hostname yyyyyyyy

ppp chap password zzzzzz

!

dialer-list 1 protocol ip permit

New Member

Re: E1 PRI configuration Help

can use this configuration?

Thnaks

!

controller E1 1/0

framing NO-CRC4

pri-group timeslots 1-31

!

!

interface Serial1/0:15

ip address 192.168.150.34 255.255.255.224

no cdp enable

encapsulation ppp

dialer idle-timeout 119

dialer string xxxxxx

dialer-group 1

isdn switch-type primary-net5

isdn point-to-point-setup

ppp authentication chap pap callin

ppp chap hostname yyyyyyyy

ppp chap password zzzzzz

!

dialer-list 1 protocol ip permit

Re: E1 PRI configuration Help

Hi there,

Your configuration basically seems fine, what is the scenario that you are trying to fulfill ?

BR,

Mohammed Mahmoud.

New Member

Re: E1 PRI configuration Help

I want to use this PRI to backup an access 2Mbps in ser0/0, if it will be down.

what the command isdn point-to-point-setup

mean please?

Re: E1 PRI configuration Help

Hi,

If you wanna use it as a backup link, try using with Static Routes with higher Admin Distance or try with Backup Interface.

If you want I may post the configs also.

173
Views
0
Helpful
5
Replies
CreatePlease to create content