Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

E1 /T1 Config

Hai all,

One of my customer is facing the issue in IPLC (Ind to US ) ..india end its E1 ..were Us end is T1 ...Customer dont want to club 2 T1 to give E1 Output at US end ..

Is this setup possible ..if so what shud be the config at both router ..

Thanks in advance

Lijesh.N.C

3 REPLIES
Hall of Fame Super Gold

Re: E1 /T1 Config

Hi,

most likely you will have full T1 in the US, and 24 timeslots E1 in India.

controller e1 x/y

channel-group 0 timeslots 1-24

Hope this helps, please rate post if it does!

New Member

Re: E1 /T1 Config

Hai,

Thanks for the reply.

This is what the config what i did, Even though link is not up

India:

Controller E1 XXX

channel group 0 time slot 1 - 24

framing NO-CRC4

Line code HDB3

Clock source line

USA

Controller T1 XXX

Channel group 0 time slot 1-24

(can you get me what should be the rest of configuration in USA end)

Lijesh.N.C

New Member

Re: E1 /T1 Config

Hai All,

Can any one help me regarding this ..

Config (framing NO-CRC4

Line code HDB3

Clock source line ) ...is modem config

Lijesh.N.C

127
Views
0
Helpful
3
Replies