What is the meaning of E3 9/1/0 is up.How to avoid 11 P-bit Err Secs, 11 P-bit Severely Err Secs, 11 Severely Err Framing Secs, 71 Unavailable Secs, 0 Line Errored Secs, 11 C-bit Errored Secs, 11 C-bit Severely Errored Secs.Whether it is due to E3 card Problem or Transmission problem.
E3 9/1/0 is up. CE3 H/W Version : 4.2.1, CE3 ROM Version : 1.1, CE3 F/W Version : 1.2.1 Applique type is Channelized E3 Total available channels 128, used 16 No alarms detected. Line Code is HDB3, Clock Source is Internal. 0 PA software resets. 0 E1 framer resets. 149 E1 throttles. Data in current interval (94 seconds elapsed): 0 Line Code Violations, 0 P-bit Coding Violation 0 C-bit Coding Violation 0 P-bit Err Secs, 0 P-bit Severely Err Secs 0 Severely Err Framing Secs, 0 Unavailable Secs 0 Line Errored Secs, 0 C-bit Errored Secs, 0 C-bit Severely Errored Secs Total Data (last 24 hours) 0 Line Code Violations, 0 P-bit Coding Violation, 0 C-bit Coding Violation, 11 P-bit Err Secs, 11 P-bit Severely Err Secs, 11 Severely Err Framing Secs, 71 Unavailable Secs, 0 Line Errored Secs, 11 C-bit Errored Secs, 11 C-bit Severely Errored Secs
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...