I'm new to supplicant development for wireless device. I'm not seeing any EAP-FAST packets coming to supplicant wireless device form the Radius Server(ACS) through Access point as i'm able to see the packet exchange between ACS server and the Access point but not between the supplicant and Access point.
And My Access point supports EAP-FAST.I doubt that my driver is not forwarding the EAP-FAST packets.
Does any changes are required for wireless driver to forward the EAP-FAST packets.
The EAP-FAST authentication will work form Client towards AAAServer, whereas AAAserver is checking ext DB. The WISM is just to transport EAP packets. Therefore you need to configure WISM for EAP-FAST. Configuration for WISM is the same as for WLC for EAP. Following link may help you
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...