Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

EIGRP ACROSS PIX IPSEC TUNNEL

We are currently running EIGRP in our main data center redistributing some BGP routes from our vendor DMZ into EIGRP. We would like to have these routes advertised to our secondary site via EIGRP.

The problem I'm experiencing is getting our router in the main data center to talk to the router in the secondary site via eigrp.

We currently connect to the secondary site via an ipsec tunnel across our pix firewalls that sit in our public dmz's.

I know when ipsec comes into play...so does gre and encapsulating specific traffic (in my case routing updates), however I am having some trouble figuring out how I should be configuring my routers on the private network to talk to each other via eigrp. I've attached a very simple diagram that gives a simplistic view of what the network looks like and what I am trying to do.

1 REPLY
New Member

Re: EIGRP ACROSS PIX IPSEC TUNNEL

Okay So I think I might have found my answer. I was doing everything correctly however I think I might have missed some access-lists on my firewall.

I found this article, for anyone else that might need it.

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800a43f6.shtml.

114
Views
0
Helpful
1
Replies
CreatePlease to create content