Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

EIGRP AD if summary is configured on interface

Hi,

I have router A having BGP routes for 20.80.0.0/24 & 20.40.0.0/24. I have redistributed those external routers into EIGRP. S0/0 of Router-A is connected with Router-B. ON S0/0, I have summarize network on eigrp like--

Router-A (S0/0)
ip summary-address eigrp 1 20.80.0.0 255.255.0.0 5

ip summary-address eigrp 1 20.40.0.0 255.255.0.0 5

I want to know, on router-B, eigrp AD for 20.40.0.0/16 & 20.80.0.0/16 will 90 or 170? Please help.

3 REPLIES

Re: EIGRP AD if summary is configured on interface

Hi,

The AD for  for 20.40.0.0/16 & 20.80.0.0/16 will be 90. because when you are summarizing the network, there will be 2 summarized routes will be installed into your routing interface with next-hop as null interface.

Finally these summarized routes are going to advertise into your neighbor.So the neighbor router will think that this as a eigrp routes. so the AD will be 90.

for more information have a look into the below url

http://www.cisco.com/en/US/tech/tk365/technologies_white_paper09186a0080094cb7.shtml#summarization

Regards

Karuppu

New Member

Re: EIGRP AD if summary is configured on interface

thanks sir.

Re: EIGRP AD if summary is configured on interface

Hi,

Glad to help you.if you find this post is useful, just rate it.

Regards

Karuppu

170
Views
0
Helpful
3
Replies