11-27-2008 03:44 AM - edited 03-04-2019 12:31 AM
Hi
I have some questions about below command
R1
router eigrp 100
eigrp stub
- By default, it will send out "summary" and "connected" routes
R2
router eigrp 100
eigrp stub connected
- does it send "connected" only, not "summary" route?
R3
router eigrp 100
eigrp stub summary
- does it send "summary" only, not "connected" route?
rdgs
Solved! Go to Solution.
11-27-2008 04:00 AM
Anita
eigrp stub = summary + connected
eigrp stub connected = connected only
eigrp stub summary = summary routes only
For full details -
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/eigrpstb.html#wp1036270
Jon
11-27-2008 04:00 AM
Anita
eigrp stub = summary + connected
eigrp stub connected = connected only
eigrp stub summary = summary routes only
For full details -
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/eigrpstb.html#wp1036270
Jon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide