Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Eigrp Ex vs directly connected

Hi,

We've R1 configured with 2 nets, 1st 172.x Eigrp 200, 2nd with 192.x/30 (connected).

R2 with Eigrp 200 & eigrp 100 redistributed in Eigrp 200, R3 with Eigrp 100 & connected to the net via int S0/0 and static route to 192.x /32 via int s0/0 too (dont ask why, temporary patch for load balance).

R3 uses redistrib out in Eigrp filtering statics to 192.x host.

The problemm happend when we dont configure the acl denying routes to host 192.x. R1 try to get 192.x using Eigrp EX route instead connected and creates a loop between R3 & R2.

Anybody can explain that?

Thanks.

Sent from Cisco Technical Support iPhone App

145
Views
0
Helpful
0
Replies
CreatePlease login to create content