if I have three neighbors and two of them just commnicate by normal way, (multicasting), but one need go unicasting. can I just put one neighbor statement? or I have to eighter all get neighber statement or no?
for example, if have three neighbor 192.168.1.1, and 192.168.2.2 and 192.168.3.3,
and I did:
router eigrp 1
neighbor 192.168.3.3 ethernet 0/0
can rest two neighbors talk to this machine? if not, does anyway to configure it?
do yo mean if use neighber, I have to use it for every router direct linked to it - Yes.
I can chose some of them use multicast and other use unicast, right? - Yes
In a single EIGRP process, we can make some of the neighbors can be communicated via multicast and some of them by unicast.
EIGRP exchanges routing information with the neighbors in the form of unicast packets whenever the neighbor command is configured for an interface. EIGRP stops processing all multicast packets that come inbound on that interface. Also, EIGRP stops sending multicast packets on that interface.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.