Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

EIGRP route no advertising

Hi,

I have 2 routers A and B as Eigrp neighbour.Eigrp neighbour ship has esteblished. Now under EIGRP I have advertise one subnet as below ,but it is not getting adverising on router B. Please advise.

RouterA#

router eigrp 100

network 172.22.9.0 0.0.0.255

no auto-summary

ip route 172.22.9.0 255.255.255.0 10.1.1.2

RouterA#sh ip eigrp top | inc 172.22.9.

#nothing in toppology table #.

RouterB#sh ip ro eigrp | i 172.22.9.

Regards.

3 REPLIES
Hall of Fame Super Silver

Re: EIGRP route no advertising

Hello Mohammed,

the IP subnet is not a directly connected subnet but you have a static route to that destination.

EIGRP is an IGP so the network command is for connected interfaces.

In this case you need to use the network command for the static route next-hop 10.1.1.2

and you need to add:

router eigrp 100

redistribute static

default-metric 10000 100 255 1 1500

!

where

default-metric bandwidth delay reliability loading mtu

Hope to help

Giuseppe

Re: EIGRP route no advertising

if the network 172.22.9.0 is not in the routing table on RA or directly connected on RA it will not avertise to B. Can you reach the network 172.22.9.0 from router A?

use "redistrubute static" instead under eigrp on router A.

New Member

Re: EIGRP route no advertising

Thanks.

128
Views
0
Helpful
3
Replies
CreatePlease to create content