I have a hub and spoke network with 200 spokes with EIGRP and suddenly one of them can not reach networks behind the Hub. The hub router and the spoke never lost the neighbors or networks. The only way to restore the spoke is changing the network or moving to the backup router. It seems like a bug, but i can not find anything
These symptoms sound quite strange. It would help us begin to troubleshoot this is you could post the output of show ip eigrp neighbor and the output of a traceroute from the spoke that is not working. There will probably be some more information that we will need and we will know better what to ask for if we see the output.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...