Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

EIGRP W DEFAULT-ROUTE

Hi

i have seen config like this:

DS1

router EIGP1

network 100.100.0.0 0.0.255.255

network 192.168.100.18 0.0.0.3

ip classless

ip route 0.0.0.0 0.0.0.0 192.168.100.17(CORE SIDE)

Why they config the default route?however eigrp is runing

regards

3 REPLIES

Re: EIGRP W DEFAULT-ROUTE

Hi there,

This configuration means that in the case of no match in the routing table (populated with either EIGRP or static routes) the default route is used having the next hope 192.168.100.17(CORE SIDE), there is no problem by doing this as a Gateway of last resort.

HTH, please rate if it does help,

Mohammed Mahmoud.

New Member

Re: EIGRP W DEFAULT-ROUTE

Hi 10xs for ur reply

Re: EIGRP W DEFAULT-ROUTE

Hi

Ali

As mahmoud suggested the u r DS1 will be going to farword the traffic it it doesnt matches any routes in u r routing table to 192.168.100.17.this is the gateway of last resort.

Thanks

Mahmood

94
Views
15
Helpful
3
Replies