Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

'Embedded RP on IPv6' + System received a SegV exception


I try to configure de folloing scenary - Embedded RP with IPv6

I used 3 cisco 2600 routers:'Cisco IOS Software, C2600 Software (C2600-ADVENTERPRISEK9-M), Version 12.4(5), RELEASE SOFTWARE (fc3)'

For cliente and server streamnig, i used Videolan-Client

I have end-to-end conectivity - in R1 i can ping sucessefully 2001:ddd::1

In R2, i have configured de serial0/1 with: IPv6 address 2001:ccc:beef:feed::1/32

in the same router, R2, i configured: 'ipv6 pim rp-address 2001:CCC:BEEF:FEED::1'

all routers have enable embedded rp: 'IPv6 pim rp embedded'

but when i put VLC to stream at address [FF76:140:2001:CCC:beef:feed::1], the cisco IOS reboot...

What is a problem?? bug in IOS, bad configurations??

i really apreciate you help

thanks in advanced.

thansk, Rui Bernardo



PC1--- .1[ R1 ].1---serial----.2[ R2 ].2---serial-----.1[ R3].1-----PC2

.....eth0.....ser0/1.....ser0/0.....ser0/1.....s0/0..... eth0/0


R1 con0 is now available

Press RETURN to get started.

15:51:59 UTC Mon Mar 4 2002: Unexpected exception to CPUvector 1200, PC = 0x814D7104, LR = 0x814D70E4

-Traceback= 0x814D7104 0x81F6CDB8 0x819528D8 0x81952914 0x827F6384 0x827F72C8 0x827E2C94 0x827E2EE8 0x827DB198 0x8280D6F0 0x8280D880 0x827DB8E4 0x8280CAF8 0x8280CCE8 0x827CC06C 0x827CB754

CPU Register Context:

MSR = 0x00009032 CR = 0x30009009 CTR = 0x806FAF98 XER = 0x80001C7F

R0 = 0x00000030 R1 = 0x85D5E0D0 R2 = 0x84AD0000 R3 = 0x00000001

R4 = 0x851AE3A0 R5 = 0x851AE1D4 R6 = 0x00000001 R7 = 0x68010000

R8 = 0x00009032 R9 = 0x00000000 R10 = 0x68010000 R11 = 0x84C10000

R12 = 0x02147698 R13 = 0xFFF4B634 R14 = 0x8519F1A8 R15 = 0x00000000

R16 = 0x84C9DBE4 R17 = 0x00000000 R18 = 0x84ED1C1C R19 = 0x84390000

R20 = 0x84390000 R21 = 0x84ED0000 R22 = 0x00000000 R23 = 0x00000590

R24 = 0x85417140 R25 = 0x00000001 R26 = 0x00000560 R27 = 0x00000024

R28 = 0x074050D8 R29 = 0x85D42318 R30 = 0x84FD18FC R31 = 0x84FD18FC

Writing crashinfo to flash:crashinfo_20020304-155159

=== Flushing messages (15:51:59 UTC Mon Mar 4 2002) ===

Queued messages

*** System received a SegV exception ***

signal= 0xb, code= 0x1200, context= 0x84e24818

PC = 0x814d7104, Vector = 0x1200, SP = 0x85d5e0d0

System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)

Copyright (c) 2003 by cisco Systems, Inc.

C2600 platform with 131072 Kbytes of main memory

program load complete, entry point: 0x80008000, size: 0x1c413c0

Self decompressing the image : ##########


Re: 'Embedded RP on IPv6' + System received a SegV exception


SegV exceptions are mostly turned as a S/W (IOS) related issue..

Also the notable possible reasons for the same are

1)Access to an invalid memory address

2)Write access to a read-only memory region

3)A jump to an invalid PC (often 0x0)

would also suggest to check this link if u havent seen this earlier..


CreatePlease login to create content