I want to know can someone tell me how to enable multi-cast across the WAN, I'm currently the VoIP guy for my company and I have the CUCM piece done I just need to know how to enable the multi-cast across the WAN so all the phones can have MOH.
What I have is 10 sites that have older CUCM boxes and the boxes are going away and all they are going to have is a router with PRI's and a MPLS WAN connection back to our data center. I know once I get rid of the older boxes they won't be able to get MOH unless I do multi-cast across the WAN and I wanted to know how to set it up.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...