cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
519
Views
0
Helpful
2
Replies

Enable SNMP in Internet Router

johnlloyd_13
Level 9
Level 9

hi experts,

we are using 7204VXR for our internet edge router. we want to set up snmp for monitoring purpose for this device. is it a good practice to set/open snmp on our internet router?

1 Accepted Solution

Accepted Solutions

Joe Clarke
Cisco Employee
Cisco Employee

Sure. You will need to be able to manage this device. However, you will want to make sure you secure SNMP properly. That will involve adding an ACL to your SNMP community strings or SNMPv3 credentials, and maybe even establishing SNMP views.

There is a good article on securing SNMP at http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094489.shtml . This article covers SNMPv3 as well as adding ACLs to prevent unauthorized hosts from polling your devices.

View solution in original post

2 Replies 2

Joe Clarke
Cisco Employee
Cisco Employee

Sure. You will need to be able to manage this device. However, you will want to make sure you secure SNMP properly. That will involve adding an ACL to your SNMP community strings or SNMPv3 credentials, and maybe even establishing SNMP views.

There is a good article on securing SNMP at http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094489.shtml . This article covers SNMPv3 as well as adding ACLs to prevent unauthorized hosts from polling your devices.

thanks!

Review Cisco Networking products for a $25 gift card