Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Enabling https for SDM in cisco 2811 router

Hello,

I am having cisco 2811 router running IOS 12.3(8r). I am currently accessing SDM through http method. I wanted to access it through https and disable http method.

What procedure should I follow

Thanks,

Chandru

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Enabling https for SDM in cisco 2811 router

You need an IPSec IOS image to enable https server on your router.

HTH

Sundar

5 REPLIES

Re: Enabling https for SDM in cisco 2811 router

Chandru,

I believe the commands you need are,

From config mode:

no ip http server

ip http secure-server

Check out this link for more info:

http://www.cisco.com/en/US/products/ps5854/prod_configuration_guide09186a00802c35f5.html

HTH

Sundar

New Member

Re: Enabling https for SDM in cisco 2811 router

The problem is I am not getting the ip http secure-server option.

Router(Config)#ip http ?

The output is

access-class

authentication

client

max-connections

path

port

server

time-out policy

I could not also generate rsa keys

Silver

Re: Enabling https for SDM in cisco 2811 router

Most likely you aren't running an image that supports crypto, could you paste in a 'show version' so we can see which feature set you're running?

Re: Enabling https for SDM in cisco 2811 router

You need an IPSec IOS image to enable https server on your router.

HTH

Sundar

New Member

Re: Enabling https for SDM in cisco 2811 router

Thanks Sundar, Thanks Wochanda. I am not running an IPSec IOS image. Its an regular Routing IOS image.

2697
Views
0
Helpful
5
Replies
CreatePlease to create content