01-18-2006 01:18 AM - edited 03-03-2019 11:29 AM
Hi,
How to enable the SSH for the line password in 2800 series Router ?.
Regards,
Raju
01-18-2006 02:04 AM
Do the following:
Configure a host name for your router:
hostname
Configures a host domain for your router:
ip domain-name
Enable the SSH server for local and remote authentication on the router:
crypto key generate rsa
And then do the following ( if using tacacs):
aaa authentication login default tacacs+ tacacs-server host
tacacs-server key
Note: you can also use local authentication in plac of tacacs using the following:
username myuser password mypassword
aaa authentication login default local
hope that helps - pls rate the post if it does.
Regards,
Paresh
01-18-2006 02:18 AM
Hi,
One thing I neglected to mention is that you will need an IOS image that supports encryption (DES/3DES)...
Paresh
01-18-2006 03:14 AM
Thanks Paresh. I'll use local authentication only (no RADIUS or TACACS+). I'm going to enable SSH in production Router. Will it cause any problem (packet drop etcc... for a moment ) while enabling SSH feature.
Thanks
01-18-2006 03:18 AM
Hi Raju,
While it should not theoretically cause a hit, these things are always quite unpredictable. Therefore, you should take appropriate precautions before you do so.
Do you have a lab router where you can try this out first ?
Hope that helps - pls rate posts that help.
Regards,
Paresh
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: