09-22-2005 06:27 AM - edited 03-03-2019 10:33 AM
Dear, All
My router 2600 doesnt have an encapsulation CISCO when I´m configuring some serial interface over frame-relay... it had only one encapsulation IETF... I dont have access to download a new IOS version... Please.. Help me! Tks!!
Solved! Go to Solution.
09-22-2005 08:04 AM
Just type "encap frame-relay" and hit enter. I think it defaults to cisco.
09-22-2005 06:56 AM
Can you paste a sh version out of this router ?
09-22-2005 07:16 AM
What is sh??
09-22-2005 07:18 AM
show version
09-22-2005 07:42 AM
sho ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.0(2)XC2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC:Home:SW:IOS:Specials for info
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Wed 20-Jan-99 19:19 by rnapier
Image text-base: 0x80008088, data-base: 0x80649B68
ROM: System Bootstrap, Version 11.3(2)XA3, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-I-M), Version 12.0(2)XC2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Router_D15 uptime is 1 day, 8 hours, 46 minutes
System restarted by power-on
System image file is "flash:c2600-i-mz.120-2.XC2"
cisco 2620 (MPC860) processor (revision 0x100) with 18432K/6144K bytes of memory.
Processor board ID JAB03050651 (2014310635)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
FastEthernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Router_D15#
09-22-2005 08:04 AM
Just type "encap frame-relay" and hit enter. I think it defaults to cisco.
09-24-2005 01:42 PM
Thanks very much!!!!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: