Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Encapsulation Frame Relay

Dear, All

My router 2600 doesnt have an encapsulation CISCO when I´m configuring some serial interface over frame-relay... it had only one encapsulation IETF... I dont have access to download a new IOS version... Please.. Help me! Tks!!

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Encapsulation Frame Relay

Just type "encap frame-relay" and hit enter. I think it defaults to cisco.

6 REPLIES

Re: Encapsulation Frame Relay

Can you paste a sh version out of this router ?

New Member

Re: Encapsulation Frame Relay

What is sh??

Re: Encapsulation Frame Relay

show version

New Member

Re: Encapsulation Frame Relay

sho ver

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-I-M), Version 12.0(2)XC2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

TAC:Home:SW:IOS:Specials for info

Copyright (c) 1986-1999 by cisco Systems, Inc.

Compiled Wed 20-Jan-99 19:19 by rnapier

Image text-base: 0x80008088, data-base: 0x80649B68

ROM: System Bootstrap, Version 11.3(2)XA3, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)

ROM: C2600 Software (C2600-I-M), Version 12.0(2)XC2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Router_D15 uptime is 1 day, 8 hours, 46 minutes

System restarted by power-on

System image file is "flash:c2600-i-mz.120-2.XC2"

cisco 2620 (MPC860) processor (revision 0x100) with 18432K/6144K bytes of memory.

Processor board ID JAB03050651 (2014310635)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

FastEthernet/IEEE 802.3 interface(s)

2 Serial(sync/async) network interface(s)

32K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Router_D15#

Re: Encapsulation Frame Relay

Just type "encap frame-relay" and hit enter. I think it defaults to cisco.

New Member

Re: Encapsulation Frame Relay

Thanks very much!!!!

107
Views
0
Helpful
6
Replies
CreatePlease login to create content