We have etherman plus circute terminated in our router fastethernet port and we also created subinterface on this and the encapsulation for the subinterface is dot1q and for phisical interface is 802.1q.
The problem is the link is not coming up when i see the interface status it shows interface is up and protocol is down.
I have changed the duples and speed and tried and removed the encapsulation on logical interface also... but link has not come up.
Please help me in this regard and suggest what i have to do ... or i am missing somthing??
From your statements above you state that you have the physical interface set for dot1q and the subinterface set for dot1q. I dont think that you should set the physical interface for dot1q trunking. Leave it as default. It is the subinterfaces that need to have encapsulation modified with the trunking and vlan that they will be...Try taking the encap for the physical off and default it....Good Luck...
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...