I would like to know about Enterprise Load balancer hardware and software which is recommended for cisco devices and how its work in enterprise network where i have 3 ISP and also suggest me best hardware vendor for load balancer.
The basic idea of loadbalncers is to have redundancy ,fault tolernce and best performance of application. Multiple physical servers are grouped into a virtual Ip address in the loadbalancer .The clinets will be accessing the service torugh this virtual IP address. Traffic to the service will be hitting the Loadbalancer and loadbalancer will be distribute the packet to different servers in the group based on the loadbalancing method configured. (ex round-robin, based on weight, based on load of the servers)
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...