Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

EoMPLS - ME6524 to 7304.

I'm having an issue getting MPLS to work from a ME6524 to a 7304.

The following is my configuration.

ME6524

-------

interface vlan 84

mtu 1534

xconnect 10.1.1.1 111 encapsulation mpls

7304

-----

Gigabit0/1

mtu 1534

Gigabit0/1.111

encapsulation dot1q 84

xconnect 10.2.2.2 111 encapsulation mpls

Outputs from 'show mpls l2transport vc' & 'show mpls l2transport vc detail' seem fine. Both sides are UP/UP. I see labels in the forwarding table.

The only weird thing...is on switch sitting off the 7304 I don't see any mac-addresses coming from the EoMPLS connection. But when I check the mac-addresses on the ME6524 I can see the mac-addresses of the devices connected to the 7304. Just not the other way around.

Could this be a code issue?

1 REPLY
Cisco Employee

Re: EoMPLS - ME6524 to 7304.

Jeff,

Could please provide the output of a "show mpls l2 binding" from the 7304.

Regards

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
141
Views
0
Helpful
1
Replies
CreatePlease to create content