08-05-2009 09:23 PM - edited 03-04-2019 05:39 AM
How to erase the startup config of an XR device?
08-05-2009 09:38 PM
In enable mode: wr er
08-05-2009 10:42 PM
write erase command wont work on XR devices
08-10-2009 07:40 AM
When you are in enable mode, or exec depending on what you call it, if you type erase what are your options?
I believe your option would be erase startup-config
08-10-2009 07:43 AM
04-05-2011 12:18 PM
go into configuration mode in ios-xr
make a small change such as "no hostname"
do
commit replace
that will wipe out the entire config.
04-06-2011 05:06 AM
Hi,
What is your hardware platform?
Please try the following commands after removing the standby RP:
commit replace
commit replace best-effort
Do not forget to create a user before reloading the router as given below:
RP/0/RSP0/CPU0:ios(config)#username abc
RP/0/RSP0/CPU0:ios(config-un)#secret abc123
RP/0/RSP0/CPU0:ios(config-un)#group root-system
RP/0/RSP0/CPU0:ios(config-un)#commit
Please revert .... !!!
Regards,
Akhil
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: